Posts made by Tu Ken

• Front Panel connector pinout on base carrier board

  Hi Sir,   do you mind to share the screen for reference? because I didn't see any download link for our schematic in the windows download page   Best Regards, Ken

  posted in General

  TK

  Tu Ken
  11/9/23, 1:10 PM
• [Help Needed] Need the Definition of DB40 connector of A2 board.

  Hi Sir,   I attached the line for the user manual of DB40 download http://ftp.adlinktech.com/MCPS_DB40_MANUAL-0V1.zip   Best Regards, Ken

  posted in Hardware

  TK

  Tu Ken
  11/7/23, 1:42 AM
• No cpu temperature and system inventory info in BMC

  Hi Sir,   there's also a P_2V5_BMC_AUX sensor reports critical and only on 0.02V, Is this normal? for this symptom, it is related to the BOM, therefore, please help to provide the seri...

  posted in Hardware

  TK

  Tu Ken
  10/4/23, 4:51 AM
• No cpu temperature and system inventory info in BMC

  Hi Sir,   First is there's no CPU temperature sensor, and the BMC_FAN_1 Speed is a fixed value which doesn't change. it is limitation by current BMC FW, we will improve it in later BMC vers...

  posted in Hardware

  TK

  Tu Ken
  10/3/23, 9:13 AM
• CPU Replacement

  Hi Andrew,   we won't suggest the user replaces the CPU by self, maybe it will cuase the system damaged and further the system cannot be boot normally in addition, you also would lose the w...

  posted in Hardware

  TK

  Tu Ken
  9/14/23, 5:55 AM
• Failed to initialize SPI

  Hi Sir, please try to updating the Adlink MRAA patch as the link below, we no longer see SPI failure issue  http://ftp.adlinktech.com/0001-adlink_mraa_px30.zip  

  posted in Hardware

  TK

  Tu Ken
  8/9/23, 12:41 AM
• Failed to initialize SPI

  Hi Sir,   did you follow the steps in ipi wiki for Debian MRAA and run adlink test application?

  posted in Hardware

  TK

  Tu Ken
  7/25/23, 7:57 AM
• Garbled serial connection output

  Hello Magesh,   the instruction is correct after confirming, I used Ubuntu 22.04.1 LTS (5.15.0-1028) did you follow the content as below link? https://www.ipi.wiki/pages/1200-docs?page=Ser...

  posted in Hardware

  TK

  Tu Ken
  7/21/23, 3:28 AM
• Garbled serial connection output

  Hello Magesh,   may I ask what host users you use? Linux or Windows?

  posted in Hardware

  TK

  Tu Ken
  7/17/23, 1:50 AM