install AioT-Tools failed

• smarc-1200

• pz

  peter zhang

  10/18/23, 2:41 AM

  hello:

          i follow the document：https://www.ipi.wiki/pages/1200-docs?page=AIoTToolInstallation.html#AIoTToolInstallation.html

         but encounter the failed as below：

  •     zhangk@zhangk-virtual-machine:~$ aiot-config 
    fastboot: OK 
    udev rules: OK (md5: a3b2767b42ee01d7c62bf394400528ae)
    Serial device write access: FAIL 
    You may experience some write permission error('open(/dev/ttyACM0): Permission denied')
    Consider adding your user to the 'dialout' Linux group (sudo adduser `whoami` dialout)

        I also try exec with root privilege，also failed：

  • zhangk@zhangk-virtual-machine:~$ sudo .local/bin/aiot-config 
Traceback (most recent call last):
  File "/home/zhangk/.local/bin/aiot-config", line 33, in <module>
    sys.exit(load_entry_point('aiot-tools', 'console_scripts', 'aiot-config')())
  File "/home/zhangk/.local/bin/aiot-config", line 22, in importlib_load_entry_point
    for entry_point in distribution(dist_name).entry_points
  File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 969, in distribution
    return Distribution.from_name(distribution_name)
  File "/usr/lib/python3.10/importlib/metadata/__init__.py", line 548, in from_name
    raise PackageNotFoundError(name)
importlib.metadata.PackageNotFoundError: No package metadata was found for aiot-tools

        I make sure I follow the documentation exactly every step of the way，and the host is Ubuntu 22.04.3 LTS

  1 likes 0 likes Liked Like

  ---

  4
  Posts

  83
  Views

  Reply

  ---

• KK

  Kothandaraman Kannadasan Staff member

  10/18/23, 8:45 AM

  Dear @peter zhang,

  Type the following commands in the terminal,

  $ echo 'SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="201c", MODE="0660", $ GROUP="plugdev"' | sudo tee -a /etc/udev/rules.d/96-rity.rules
  $ echo -n 'SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="201c", MODE="0660", TAG+="uaccess" SUBSYSTEM=="usb", ATTR{idVendor}=="0e8d", ATTR{idProduct}=="0003", MODE="0660", TAG+="uaccess" SUBSYSTEM=="usb", ATTR{idVendor}=="0403", MODE="0660", TAG+="uaccess" SUBSYSTEM=="gpio", MODE="0660", TAG+="uaccess" ' | sudo tee /etc/udev/rules.d/72-aiot.rules
  $ sudo udevadm control --reload-rules
  $ sudo udevadm trigger
  $ sudo usermod -a -G plugdev $USER

  Now, reboot the device and try the below command to make sure the setup is done properly.

  $ aiot-config

  0 likes 0 likes Liked Like

  ---

• pz

  peter zhang

  10/18/23, 9:22 AM

  hi @Kothandaraman Kannadasan 

      i have try the cmd，but encounter the same error either

  best regards；

  0 likes 0 likes Liked Like

  ---

• KK

  Kothandaraman Kannadasan Staff member

  10/19/23, 3:03 AM

  Hi @peter zhang, Sadly, we cannot duplicate what you did. You can, however, refer to the solution from here. It might be helpful to you.

  https://askubuntu.com/questions/210177/serial-port-terminal-cannot-open-dev-ttys0-permission-denied 

  0 likes 0 likes Liked Like

  ---