What type of connector is used for the 30 pin LVDS socket/plug?

Hello, I have an IMX8M Plus with WiFi and an Ubuntu image taken from here. Now the problem is that the WiFi is not recognized in the OS. Is there no support for it under Ubuntu? Thank you in adv...

@Henri Parmentier What is the log-in details for this image?

@Henrik Vendelbo Solution.  "Dip switches (bank of 4) are located near the Ethernet ports. Flip them to determine where the board should boot from" Putting this text before the obscure ...

@Allumallu Susmitha What does this mean?But you need to use micro USB OTG cable to boot the board with Yocto/Ubuntu/android. Does it boot over the OTG cable?  

Broke out the board. Everthing looks very nice. Well done making U-Boot expose boot partition as MSD. I tried to follow the Getting Started documentation. It has holes... 1) Downloaded Yocto imag...

Hi, I have started the preinstalled Ubuntu on the AVA Developer Platform and conntected the VGA port to my monitor. Could you provide the credentials to log in?

Thanks Henri.

Hi Manuel. 1.5mm no problem, verified.

Same connector height for both slots, I will measure the clearence tomorrow and provide you an update 

Thanks @henri parmentier  The part number you have provided seems to be for the E slot. Can you confirm it is the same for the B slot?  AS0BC27-S30BB-7H I see this connector is 30mm hi...

@Manuel Botija my bad, typo! they used connector is Foxconn,AS0BC27-S30BE-7H,

Hi Henri,  Sorry, you mention 5mm. I suppose you mean 1.5mm? Can you send me the part number of the connector you fit by default? Would like to check what is the maximum bottom side height i...

Seems no PCIe listed at all, I think something went wrong with your build, it does see the USB bluetooth could you try > https://hq0epm0west0us0storage.blob.core.windows.net/%24web/public/SMARC...

Hi Manuel Q1- No, we do not have 5mm clearence on the PCB side... we should change the connector for this this is feasible when volumes are to be made with a BOM deviation ( ~ 100+ )  Q2- Y...

Hello! We are looking to use the i-Pi IMX8 plus in a setup where we need to use one of the the M.2 slots. My question concerns the B-key M.2 slot. 1) Can this slot fit a 2242-D5-B module? In par...

@henri parmentier running the sudo lshw command this is what I get (there is something under usbhost2 but still not picking it up properly):     description: Computer    produc...

Doesn't sound right, you should at least see a device, even if it's not recognized. could you post the output here?, do you see the PCIe switch ?

Hi Henri I'm not able to see the PCIe device? Is it possibly a kernal problem? It was setup using the "How to build Ubuntu" under the support link of this website but for Ubuntu server instead of ...

Hi Yegan,  from the specs it should work, PCIe for wifi, USB for BT Can you see the PCIe device ? (lspcie)