thnks I made it work by adding these lines in lec-imx8mp_defconfig  CONFIG_SQUASHFS_FILE_CACHE=y CONFIG_SQUASHFS_DECOMP_SINGLE=y CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_S...

Dear @Kothandaraman Kannadasan, thanks for providing the image. Now I'm able to detect an USB decice on the USB OTG connector. But now it's NOT possible to connect to a PC using the board as devi...

Dear @Sven Brandau, I have validated the following image as you requested ( https://hq0epm0west0us0storage.blob.core.windows.net/$web/public/SMARC/LEC-iMX8MP/Images/Yocto/old_releases/LEC-IMX8MP-2...

Hi @O. JUD, sorry for the inconvenience. Definitely, we will take your feedback and make them enable.

@Kothandaraman Kannadasan , I have checked your last Ubuntu image and its the same . I checked https://github.com/ADLINK/meta-adlink-nxp/blob/hardknott/recipes-kernel/linux/linux-imx/lec-imx8mm_de...

Dear @Kothandaraman Kannadasan, I was able to boot the new Yocto image. It was very confusing that the serial port (SER 1) using a inverted logic. So only with a help of a logic analyzer the output...

I have devkit version A1. I have been using the stock ubuntu OS for quite a while and have not had any issues for the type of work I've been doing.  I received the eeprom chips some time ago....

Hi Kothandaraman I'm not using your Image but i'm building Ubuntu as described on this page : https://www.ipi.wiki/pages/imx8mp-docs?page=HowToBuildUbuntu.html . I need to add new devices modules...

Hi @Sven Brandau, We have fixed some software bugs and added build package information with the latest image. The latest image Yocto image working fine. If you want to see the serial output logs yo...

Hi @O. JUD, Our latest Ubuntu image seems like working well. So, please download our image from here, https://www.ipi.wiki/pages/downloads-imx8mplus. Meanwhile, I will try to check with our softwar...

Hi @Jared Horton, Could you share the details of the Module and the SSD? Please let us know which module you have tested 2G or 4G? as well as the SSD information.

Hi,  Snapd is not running as expected in the ubuntu build. It seems that XZ support for squashfs is missing in kernel build. Is there a reason for that ?  Regards

The company I work for bought the I-Pi SMARC IMX8M Plus evaluation kit and a 500GB M.2 SSD for it. We want to run a few tests that require writing to this SSD. I setup Ubuntu 20.04 on the board by ...

Dear @Kothandaraman Kannadasan, I've downloaded the Yocto image: https://hq0epm0west0us0storage.z22.web.core.windows.net/public/SMARC/LEC-iMX8MP/Images/Yocto/LEC-IMX8MP-2G-IPi-SMARC-PLUS_Yocto-har...

Dear @Sven Brandau, I verified there was a software bug in that image. We updated the new image for IMX8MP 2G and 4G. Please download the updated image for IMX8MP-2G by clicking the below link. (h...

Hi , thanks for your reply .  I have another request regarding snap command.  Seem that it does not work on unbuntu rootfs created from debootstrap. I obtain error like :  squasfs ...

Dear @Kothandaraman Kannadasan, The Yocto version I'm running supports lsusb:root@lec-imx8mp:~# lsusbBus 002 Device 002: ID 1d5c:5500 Fresco Logic Frescologic USB3.1Gen2 HUBBus 002 Device 001: ID 1...

ICan I know what features are ready ? e.g. SMMU V3

Dear @Laurent Rouvet, Please refer to the attached image. For more details, go to the download page and download the schematic diagram of IMX8MP.

Dear @Sven Brandau, The Yocto image won't support USB Utils commands by default. So, you can't use "lsusb" command. Instead of that, you can use the following commands to check your USB drive and o...