Hi Chie, Thank you for your patience. The following is my reply.   Have you ever test 6 camera concurrently? -->No. Due to the restriction that cameras of the same brand will have the s...

Just got my dev kit today and tried the Alphacool cooler and discovered the same issue of the block being too big to fit the recess to the CPU :-(  Is it possible to order the custom bracket f...

Where can i find the boot switch ?   For I-Pi SMARC 1200, the boot switch must be 1001 on the target device.

Hi Neha, Thank you for your patience. Please refter to the commands below. <<<<<<<<<<<<<<<<<<<<<< # sudo apt-get update# sudo ap...

Hi Chie, Sorry for the late reply. I will confirm your questions with our team member. Please wait for an update. Thx! BR, Rubio

Hi Magesh No, the kit comes empty, please use following instructions to flash the OS you downloaded https://www.ipi.wiki/pages/1200-docs?page=BootFromUFS.html at the moment this is only Yocto, A...

Hey gang - I'm trying to leverage Redfish with my AVA and AADP kits, but neither seem to have it even running on the BMC?   I've posted a bit about my trials with it here: https://community....

Hi, I just received the kit. Upon powering ON, i don't see anything on display, does the kit comes with a default image flashed? Regards Magesh      

Hi Neha, Sorry for the late response. We will confirm with our engineer team about your question. Please wait for our update. Thx! BR, Rubio 

Hello. Could you suggest a specific antenna? I can't find the exactly option of "pcb antenna with mhl cable". Also, how about bluetooth? Devices are not detected on RB5.

Hello Magesh, For AI-based tasks common INT8, INT16, or  FP16 models can run. you can use tensorflow Lite > GPU and Digital Signal Processor (DSP) arm-NN > Cortex-A CPUs, Arm Mali GPU...

Hi Kumar,  Best step to start with this is the docker docs page https://docs.docker.com/engine/install/binaries/ I think in your case you could start with binaries, if this is not working y...

Hi Kevin,  You are correct about the antenna's, for full gain those need to be connected. As a dev. kit the antenna's are not included by default. If you want to have reception that goes fu...

Ok. I thought you have 5G function, because I find a SIM slot on SMARC RB5.  

Have you ever test 6 camera concurrently? Can it keep working normally at least 24 hours? Thanks

I Have a imx8mp board and i need to add docker image on the top of yocto image of that can anyone help how i proceed further

Hello. I have Wifi and bluetooth connection issues on I-Pi SMARC RB5. 1. The received Wifi signal is so weak. RB5 is not able to connect to Wifi from a router. I can see the Wifi name in Visible N...

Hi, How do I access the APU (= NPU) in the SMARC 1200 system? Regards Magesh

We got ours and had the same problem. I just send a message to Alphacool if we misunderstand something. The socket being used by us is the offical Ampere Altra socket, there are not other options

Hi Rebecaa, Please refer to the link of the module fan connection for your reference. vendor P/N：HW12-004-R0S-00Description：Wafer,4pin,Right Angle(90 degree),SMD,pitch=1.25mm, color=white BR, R...